Updated Engine Multi function Digital Meter GV58VS GV59 Generator Multifunctional Digital Meter With Protection Function(GV58VS DC8-36V)

Electronic Speed GovernorsIndicator name/Main functionPOWER : Light up after switching on the power supply.RUNNING:When the frequency is higher than the "Freq.for start success", it will be lighted.ALARM :Flash when any alarm.Parameters SettingsPress "PROG" for 3 seconds and show that "0---" means enteringthe password input interface. Press the " " or "-" key to change thecurrent password value. Press the "PROG" key to move to the right. Ifthe password error will automatically exit the settings interface, please re-enter. After entering the correct password, press the "PROG" key. When "P00" is displayed, it indicates that it has entered the setup mode and the first option is displayed. Press the " " or "-" key to select the options that need to be modified, press the "PROG" key to enter the modified state; press the " " or "-" key to change the parameter value, press the " " or "-" key to remain unchanged, can increase or reduce the parameter value; after adjustment, press the "PROG" key to to the upper parameter browsing interface. After setting the parameters, press the "PROG" button for 3 seconds, then save and exit the setting mode. When setting parameters, if more than 30S is pressed without any key, the setting interface will automatically exit and the modified parameters will be saved. The parameters will take effect immediatelyafter they are saved and modified.GV58VS ParametersOperation Voltage:DC8-36V ContinuousPower Consumption:MAX1.5WAC Voltage Input:3 phase 4 wire 30-276VAC(ph-N),10-75HzAC Current Input:Secondary input of current MAX 5AMAX Accumulating Time:9999.9Hours(Min Store time:6min)Alarm Output:3AMP Non-contact outputWorking condition:-30-70Storage condition:-40-85Protection Level IP54:when waterproof rubber gasket is addedbetween controller and its panelOverall dimension:100mm*100mm*77mmPanel cutout:91mm*91mmGV59 ParametersPower Voltage:AC165-265V;Consumption Power:MAX 2W;Voltage Range:L-N:AC165-260V; L-L:AC285-450V;Voltage Accuracy:deviation ±1%(within the range);Current Accuracy:deviation±2% (Range 0-6000A)Frequency Accuracy:deviation±0.5%(Range 45-70HZ);Accumulated Time:0-9999 Hours;Accumulated min time:0.1 hours;Operation Temperature:-20-65;Storage Temperature:-40-85;Ingress Protection:IP54(The front face after installation);Size:100mm*100mm*77mmInstallation size:91mm*91mmTypical diagram:Warning:Please don't move battery during running status orit may cause the meter broken.Notes:1. If the system checked the frequency is over " Freq. for startsuccess "(P13),the meter is connected with main power, then it willregard the genset as cranked successfully. which means the alarmwill occur after the safety delay when the fault is checked.2. When alarm protection occurs, the display page of the alarmparameter is automatically displayed. The alarm parameter value islocked and flickers. Pressing the "RESET" key can clear the alarm.3. All rights reserved. No part of this duplication may be reproducedin any material form(including photocopying or storing in any mediumby electronic means or others) without the written permission of thecopyright holder.4. Technology reserves the rights to change the contents ofthis document without prior notice.

• Electronic Speed Governors