GYHO8 4P 40A 63A 100A 125A Dual Power Manual Transfer Isolating Switch Interlock Circuit Breaker Modular Changeover Switch 1Pcs(40A)

Circuit Breaker PanelsGeneralGYHO8 dual power manual isolation switch has four functions-on, off, conversion and isolation. It can be freely switched on and off between two loads carried by a group of lines, or on two power sources.It is used for on-off and switching , using DIN standard rail (35×7.5) installation.The shell is made of PA66 injection molding, with high flame retardant performance.It is an ideal product that needs to be used for switching and opening and closing in industrial equipment and circuits.The rated current is 40A/63A/100A/125A, and it is convenient and safe to install and wire on the guide rail.Instructions for use4P Manual Transfer Switch(MTS)1.When the handle on the I position:1 and 2 are connected5 and 6 are connected9 and 10 are connected13 and 14 are connected.2.When the handle on the II position:1 and 4 are connected5 and 8 are connected9 and 12 are connected13 and 16 are connected.3.When the handle is in the middle position: both groups are disconnected.The position of the incoming and outgoing wires can be adjusted according to actual needs (the upper and lower out are not necessarily required, when used for dual power switching, the lower in and upper out must be used.)

• Circuit Breaker Panels