DC Cargo Mall 10 D-Ring Tie-Downs with Plastic Pan Fitting, Anchor Trailer Cargo Load with Floor Flush Surface Mount D-Rings; Safe Tie-Down Working Limit 533 pounds

10 Cargo Tie-Down Anchor for Trailers and TrucksHauling cars, motorcycles, bikes, camping equipment, appliances, and other freight on truck beds, and in trailers and cargo vans is made so much simpler when your tie-downs are dependable, easy to install, and unobtrusive. You can fasten this D-ring tie-down anchor to any wooden or metal surface with just one screw, locking the base mount pan fitting underneath the ring for a tight bond. This bolt-on D-ring lies flush with its mounting surface and is exceedingly versatile in use. Once fastened, it serves as a reliable cargo anchor for tie-down straps, chains, and ropes. Please keep in mind that D-rings are to be used as tie-down anchors only and should not be used for overhead lifting.Bolt-On Surface Floor Mount D-Ring Pan FittingSee the mechanical sketch with technical specs above The total safe working load limit is determined by ADDING together:» half of the working load limit of each tie-down that goes from an anchor point on the vehicle to an anchor point on an article of cargo;» the working load limit of each tie-down that is attached to an anchor point on the vehicle, passes through, over, or around the article of cargo, and is then attached to an anchor point on the same side of the vehicle;PLUS» the working load limit of each tie-down that goes from an anchor point on the vehicle, through, over, or around the article of cargo, and then attaches to another anchor point on the other side of the vehicle» Remember: a securement system is only as strong as its weakest component. Stay safe!

• ✔ FLUSH MOUNT D-RINGS: 10 Pack | This bolt-on D-ring lies flush in its rugged plastic pan fitting so the D-ring doesn’t hazardously protrude from the floor. Galvanized steel means its zinc coated for corrosion and rust resistance and well-built to last. Working Load Limit: 533 pounds. NOTE: Mounting hardware is NOT included.
• ✔ ANCHOR ACTION: So you’ve got a (utility, enclosed, cargo, travel, snowmobile) trailer, pickup, truck, flatbed or cargo van. And you’d like to tie down your (motorcycle, bike, snowmobile, ATV, go-cart, landscaping equipment, farm tools, appliances, camping gear, delivery boxes, lumber) load. Maybe you’ve got a bike bench or pool deck in need of anchor spots. These flush D-ring tie-downs are designed for everyday use and provide you with a lifetime of dependable strength and versatility.
• ✔ DIMENSIONS: The 2 1/4" x 2" D-ring has an attached welded bolting clip with a 3/8" diameter hole. Easily attach S-hook or J-hook straps, bungee cords, motorcycle tie-downs, ropes, chains and soft loops through the ring’s 1-1/2 by 1-13/16” inner clearance. The 4” pan-fitting anchors the 1/4" diameter D-ring in place for a secure hold. See the images for a detailed sketch with all the dimensions of these tie-downs.
• ✔ EASY INSTALLATION: First install the plastic base with 2 screws into the 1/4” mounting holes. Then screw the D-ring into it, securing the base mount pan fitting underneath for a tight bond. These anchors mount well to plywood and metal on the floor or walls of your trailer, or truck.