CO2 Regulator by Carbon Accelerator for C02 Tanks - Gauge for Pressure and Flow Meter with 120v Plug for Solenoid Valve for Grow Rooms, Tents, and Works with PPM Controllers and Timers

The Carbon Accelerator CO2 Regulator has all the features ever hydroponics grower needs including flow rate modulation, pressure gauge, 6' power cord, and easy to follow instructions. Whether you're connecting it to a simple timer or a more sophisticated CO2 PPM meter, the Carbon Accelerator CO2 Regulator will increase your plants yields by 15-30% when used properly. CO2 Regulator w/ Flow Meter - REG-1 features an accurate, easy to adjust CO2 flow meter that supports from 0.5 to 15 cubic feet per hour, a pre-set regulator that never needs adjusting, and an electronic solenoid valve. Each CO2 regulator also comes with a tank pressure gauge, an easy to read flow meter, and a 6′ foot power cord. This regulator also works with any 120V device for easy installation. Once the CO2 regulator is installed, simply add the tubing needed to disperse the CO2 evenly throughout your room by attaching the tubing to the back of an oscillating fan for even dispersion. If you are using this without a digital CO2 controller, you will need to use a timer. This regulator is backed by a 3-year full exchange warranty as well. This CO2 Regulator NOT UL Listed and CE Approved. Flow Rate Range: 0.5 to 15 Square Feet Per Hour.

• ✓ VERSATILE - Indoor growing, brewing, hydroponic setups, and more. Connects perfectly to standard 20lb and 50lb CO2 tanks, among others.
• ✓ ALLOW YOUR PLANTS TO THRIVE - For indoor gardeners, using a CO2 regulator can increase your yields by 15-30% when used properly. Recommended PPM 1000-1500. Only emit carbon dioxide (CO2) while lights are on.
• ✓ EVERYTHING YOU NEED - Two plastic tank washers, 15' of CO2 dispensing tubing, high quality oil-less pressure gauge, heavy duty solenoid valve (120v), flow meter (0.5 - 15 SCF/hour), detailed instructions with chart showing how how to calculate your CO2 concentration in your room with a simple timer.
• ✓ SIMPLE INSTALLATION - Screw the thread into your CO2 tank with one of the white washers supplied. Adjust the flow adjustment knob to your desired setting. Then plug in the 120v power cord into your CO2 monitor or timer. Lastly open the CO2 tank by rotating the valve 2 or 3 rotations.
• ✓ BUILT TO LAST - We believe in the quality of our products and include a 1-Year Warranty on all parts