120W Chimney Fan, Household Exhaust Smoke Machine Dust Chimney Induced Draft Fan, Chimney Ventilation Fans, Fireplace Smoke Extractor Pumps

Product descriptionWind Ambassador fuels full burn/Fast temperature rise, energy saving/Good wind effect. Multi-leaf drive, free wind, no smoke.The installation is simple and quick, and the base design is closely connected with the chimney interface, which is firm and stable in operation.The household induced draft fan, is resistant to high and low temperature and can easily cope with all kinds of bad weatherWeight: 3kgVoltage: 110V (USA), 220V (Europe)Power: 120WApplicable caliber: 14-21cmColor: image colorPackage: 1 * induced draw fanPlease Note:1. Turn off the power switch when installing or removing to avoid electric shock.2. The interface to the smoke outlet must be fastened with waterproof insulating tape.3. The installation at the interface with the chimney must be firm and the interface must be tightly integrated into the chimney for the best effect.4. If the induced draft fan stops working, attention should be paid to the backflow of smoke through which smoke escapes.5. The smoke outlet is placed on the chimney. The smoke outlet must be more than 6 meters away from the fire source, otherwise the induced draft fan will be burned. The temperature of the fireplace cannot burn the insulation layer of the power cord.

• The shell and bracket are made of thickened, reinforced, and high-quality cold-rolled plates, which are firm and non-deformable.
• The new household induced draft fan, is resistant to high and low temperature and can easily cope with all kinds of bad weather.
• Strong wind, strong and durable, strong wind. Let you feel the new wind experience.
• It is very suitable for fireplace accessories. The chimney induced draft fan creates an exhaust and induces the rapid release of smoke to prevent the smoke from escaping smoothly from the chimney due to the poor chimney. Not only does the smoke drain quickly, but it also has excellent performance.
• The household fireplace uses an induced draft fan and the outlet temperature should not exceed 60 degrees. Otherwise the induced draft fan will be damaged. Install the power cord with at least 0.5 square copper wire.